The entire set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the form of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of this material is 4 mm.
If you would like, you can boost the length of the construction to 6 metres or more. To do this, it’s sufficient to attach a two-meter extension. When choosing a drawing, then look closely at the space between the arches. This figure must be 65 cm, that’s the most appropriate duration for the specified depth of this material. The diameter of the doors based on the manufacturer’s drawing is 90 cm.
Before building a polycarbonate greenhouse, it’s important to choose a spot for its location. If that is done correctly, it is possible to provide yourself with a harvest of fresh vegetables for the whole year.
The location for the upcoming greenhouse is marked instantly at the preparation of this garden plot. So as to melt the snow at the positioning of the greenhouse as early as possible, the best point on the site will be a small elevation. Furthermore, in such a location is not going to have to be concerned about significant humidity as soil and atmosphere in the building.
Assemble a polycarbonate greenhouse in an elevated site – means to take care of the optimal temperature inside.
If it is not feasible to place a greenhouse on an elevated position, you’ll have to pour a layer of fine shattered rock around 20 cm and the exact same layer of fertile soil to create seedbeds.
Before assembling a greenhouse in your garden plot, it’s also wise to think about where and how this construction is going to be installed. First, you have to select a location for it. The greenhouse ought to be found at a metropolitan region at least a few meters away from homes, barns and other structures.
The best way to Put in a greenhouse according to the sides of the world
Be sure to measure the dirt surface – it’s ideal to remove the top layer. This can also eliminate weed seeds. And for ease of work, eliminate the dirt in an area that is around a meter wider on both sides of the rectangle you desire.
It’s also worth thinking about having a base. As manufacturers say, now gidpostroy.ru most greenhouses do not need it, particularly if they (greenhouses) are used just in the summer and spring time. However, experienced gardeners still suggest making at least a basic basis from a pub. It’s quite simple – it’s sufficient to connect with each other using metal screws and corners four parts of wood using a cross-section of at least 10 * 10 cm. The dimensions of such a base should be equal to the base of their upcoming greenhouse.
Simple bar base
You might also make a strip foundation of concrete. He is more reliable than a bar base, but requires greater financial and labor costs. Incidentally, the rainwater, which will be used in winter, without it and don’t do with it whatsoever.
Stages of the formation of a strip base: a schematic representation
Many manufacturers counsel to put in greenhouse structures without creating a base. For this function, they equip the framework with specific T-shaped legs, so the structure was firmly fixed. However, as practice shows, it’s still required to construct a base: so and the basis will be more rigorously fixed and the components of the foundation in contact with the ground, will be saved much more in its original state.
The most important thing is to see to the material with special agents to protect the wood from moisture. The material is usually installed on concrete cubes which are dug into the soil. For a six-meter structure, they want 10 pieces: four on either side and one in the middle of the ends.
Before you do the greenhouse itself, you will need to choose the ideal location for it. It must be an even website, so that the framework was found equally, without distortions. It needs to be bright and not obscured by trees or buildings.