Gypsum tiles have to be laid properly, as not only the aesthetic appearance of cosmetic facing, but in addition the service
quality of the substance will be dependent on the engineering of job. The product is more universal, and it may be attached to
plaster, concrete, brick or gypsum board sheets, provided the surface of the foundation is even and has no defects.
If the defects of this base are significant, it should be completely treated with primer, and then a cement mortar is created,
which satisfies all of the cracks. Subsequently the surface should be repeatedly primed and dried. Primer treatment is essential
to improve the bond between the tile and the wall. In this case, its makeup should decide on a special, containing elements which
block the look of fungus and mould.
In today’s interior of the rooms most often used gypsum tiles, imitating natural stone or brick. To execute cosmetic finishing
yourself, it is essential first of all to choose a strategy of tile positioning and prepare a solution. It is very important to
look closely at the reverse side of the substance. When its surface includes an embossed surface, then the glue should be put
using an even trowel, and if it’s even, then using a top notch one.
The technology of the work is as follows:
* A thin coating of adhesive mortar is applied to the pre-prepared wall. It’s spread over the bottom so that it is likely to put
4-5 tiles. Decorative cladding can be placed either on plasterboard, and on putty.
* Glue the back side of these tiles with adhesive.
* Plaster elements are pressed against the walls and their location is corrected. To align the seams, it’s recommended to use
* Finishing is performed in rows, all which should be changed by half of a tile. Facing is completed to the corners of the
space, and then immediately get rid of any residual mortar in the joints.
Drying the walls takes no more than a day also takes a constant humidity and temperature in the room. The final stage in the
laying of gypsum tiles is that their decor. To do this, the joints between these elements are filled with a particular solution,
the shade of which suits the brick.
Decorative imitation of brickwork around the walls is carried out in the following ways:
* Cutting the surface of the stitches of masonry using a bolt cutter along with your own hands;
* laying of tiles beneath the brick:
* mimicking the structure and colour of the side surface of one brick;
* Imitating a fragment of brickwork of many bricks.
The perfect method to decorate”under the brick” is really the one which enables you to create a practical coating with the masterfasada.ru most
appearance of its similarity to organic masonry. All three strategies to execute this sort of finishing functions meet the
requirements, however, the cutting edge of joints using a bolt will be labor-intensive and the creation of large amounts of dust,
and so let’s consider more prevalent ways.
The old finish is removed from the walls, and the outside, if necessary, is leveled to get rid of the requirement to paste plaster
onto a thick layer of glue.
Combining such cladding with different types of interior finishes may be both systematic and performed without any clear
consistency, chaotically, together with fake of indications of aging.
With the help of cosmetic gypsum tiles it is possible to mimic a lot of textures.
A lot of textures could be imitated with the support of cosmetic gypsum tiles.
The wall on which it’s to be set up should possess the following characteristics:
* Hardness and durability of the outside;
* The absence of uneven locations and sharp gaps;
* no more deformations.
Decorative tiles at the interior of the kitchen
Walls are created from a number of materials, let us break down the principles of setup.
When dealing with concrete, there’ll be no big problems. It is just essential to take into account the porosity of the material.
Concrete, which has practically no pronounced pores, should be treated with a great primer.
Mounting gypsum tiles on concrete
Before beginning work on the setup of gypsum tiles onto the walls, it is worth assessing the strength of the surface. When the
plaster does not fall off the walls and in exactly the identical time holds well, you can simply paint it using primer.
Mount the tiles onto the painted concrete should not. The surface ought to be scratched, ensuring to misfire, then it ought to be
grouted and covered with a coating of plaster.